FUNCTIONS: |
CHARACTERISTIC: |
PARAMETERS: |
1. |
Measurement of each cylinder's delivery at any speed. |
1. |
Typical product. |
Output power |
5.5 /7.5/11/15/18.5/22/30KW |
2.? |
Checking of each cylinder's injection timing with static. |
2. |
Inverter driver. |
Electric supply |
3phase380V/50HZ(or on request) |
3. |
Checking of the sealing of injection pump body. |
3. |
Adjusting speed by two ways, hand and preset speed. 7-steps speed preset. |
Interaxe height |
125mm |
4. |
Checking of the advance device in dynamics. |
4. |
High output torque, low fall of rotation speed. Adjusting speed quickly. |
Volume of fuel tank |
60L |
5. |
Checking of the pneumatic governor. |
5. |
Speed, strokes, advance angle and oil temperature are displayed by digital instruments.?? |
Cylinders |
12cyl. |
6. |
Checking of the mechanical governor. |
6. |
With protect function for over and low voltage and short phase.?? |
Feeding fuel pressure |
low:0-0.4MPA
high:0-4MPA |
7. |
Checking of the vacuum capacity of governor. |
7. |
Save electric power. |
Range of speed |
(+/-)0-4000RPM |
8. |
Measurement of the internal pressure of distributor pump body. |
8. |
It can test both distributor ( VE ) and in-line pumps. |
Control fuel temperature |
40+/-2 |
9. |
Measurement of the reflux delivery of distributor pump. |
|
|
DC. supply |
12/24V |
10. |
Testing of the electro-magnetic valve of distributor pump. |
|
|
Output air |
-0.05-0.3MPA |
11. |
Checking of the transfer pump. |
|
|
|
|
12. |
Checking of the LDA. |